Home / Products / Laboratory Equipment / VC-100 Digital Vacuum Pump Pressure Controller


Share to:
sharethis sharing button

VC-100 Digital Vacuum Pump Pressure Controller

The vacuum controller serves as a device for labs to display, adjust and control the degree of vacuum in vacuum systems. It generally constitutes the vacuum control system of rotary evaporator along with vacuum pump, which enables repeatable distillation experiment and recovery of many kinds of solvents in an efficient and automatic manner.


• A wide range of measurement and control, 1-1,000mbar.

• Iwo control modes of single-point control and programmed control available for choice as needed.

• Can store up to 5 programs, each containing up to 5 segments of programming control.

• A large-size TFT touch screen display control allows easy operation.

• All parts in contact with vapor or liquid are made of PTFE, ceramics or other high-performance materials and can effectively resist corrosion caused by organic solvents, water, acid and alkali.

• A built-in vent valve can feed inert gas into system equipment.

• One-stroke decompression allows easy installation and dismantling of vacuum system.

• Can be connected with pump power control for temporary shutdown of pump power supply after reaching stable degree of vacuum for energy conservation and environmental protection. Can also be operated in the normally open statue of pump.

Vacuum setting range1-1000mbar
Vacuum measurement range1-1000mbar
Control operation modeSingle-point control mode,
Programmed control mode
Control programCan store up to 5 programs, each containing 5-step control
(capable to set the degree of vacuum and time)
Setting methodTouch screen setting
Display5" TFT
Sensor overload pressure1,500mbar
Connector diameter8mm
Materials in contact with vaporPTFE, PR silicone and ceramics
Compatible conditions with vacuum pumppower of 50Hz vacuum pump <400W
power of 60Hz vacuum pump <500W
Overall dimensionsWXDXH189X207X193mm
Power supply110-240V,50Hz/60Hz
Operating environment10°C〜40°C, <80%RH


Hunan Runmei Gene Technology Co.,LTD

Company Address: Room 401, Building No.3 in Changsha Medical 
and Health Industrial Park, No.1048 Zhong Qing Road, Kai Fu 
District, Changsha,  Hunan Prov., P.R. China
Email: sales@runmeigene.com
Tel:(+86)-731-89919680 /(+86)-18601451556


© 2020 Runmei. All rights reserved.